Table of Contents
Advertisement
Before using for the first time
Before using for the
first time
Configure the settings for initial start-
Before using for the first time
up.
Making settings for initial
start-up
On initial start-up or after a reset to
the factory settings, you will need to
make settings.
Tip: Connect your appliance to a mo-
bile device. You can conveniently
change all settings via the
Home Connect app.
→ "Home Connect quick start",
Page 39
Requirement: "The appliance has
been installed and connected."
→ Page 13
"Add rinse aid." → Page 29
1.
"Switch on the appliance."
2.
→ Page 35
"Set the amount of rinse aid to be
3.
dispensed." → Page 30
"Add detergent" → Page 30.
4.
Start the "Programme with the
5.
highest cleaning temperature"
→ Page 20 without tableware.
To remove any marks from water
or other residues, we recommend
you operate the appliance without
tableware before using it for the
first time.
Tip: You can change this setting and
other "Basic settings" → Page 37 at
any time again.
Before using for the first time aus
Rinse aid system
Rinse aid system
You can use the rinse aid system
Rinse aid system
and rinse aid to get tableware and
glasses rinsed perfectly without
marks.
Rinse aid
For optimum drying results, use rinse
aid.
Only use rinse aid for domestic dish-
washers.
Adding rinse aid
If the rinse aid refill indicator lights
up, top up with rinse aid. Only use
rinse aid for domestic dishwashers.
Press the catch on the lid of the
1.
dispenser for rinse aid
.
Add rinse aid up to the max mark.
2.
If rinse aid spills out, remove it
3.
from the tub.
and lift
2
1
max
29
Advertisement
Table of Contents
