Table of Contents

Advertisement

Quick Links

Dishwasher
SN57YS03CE
en
User manual
Register your product on My Siemens and discover
exclusive services and offers.
siemens-home.bsh-group.com/welcome
The future moving in.
Siemens Home Appliances

Advertisement

Table of Contents
loading

Summary of Contents for Siemens SN57YS03CE

  • Page 1 Dishwasher SN57YS03CE User manual Register your product on My Siemens and discover exclusive services and offers. siemens-home.bsh-group.com/welcome The future moving in. Siemens Home Appliances...
  • Page 2: Table Of Contents

    Table of contents Safety ..........   4 Bottom basket ........ 23 General information...... 4 Cutlery drawer ........ 23 Intended use........ 4 Etagere ........... 24 Restriction on user group.... 4 Folding prongs ....... 25 Safe installation ........ 4 glassZone........ 25 Safe use ........... 6 Basket heights........ 26 Damaged appliance ...... 8 Before using for the first time ..   26 Risk to children ........ 8 Performing initial start-up .... 26 Preventing material damage ..
  • Page 3 Customer Service......   60 Interrupting programme .... 36 Product number (E-Nr.), produc- Terminate programme.... 36 tion number (FD) and consecut- Display programme information.. 36 ive numbering (Z-Nr.) ..... 61 Switching off appliance .... 36 AQUA-STOP guarantee .... 61 Basic settings........    37 Technical specifications....   61 Overview of basic settings ..... 37 Information regarding Free and Changing basic settings.... 39...
  • Page 4: Safety

    en Safety Safety Observe the following safety instructions. General information ¡ Read this instruction manual carefully. ¡ Keep the instruction manual and the product information safe for future reference or for the next owner. ¡ Do not connect the appliance if it has been damaged in transit. Intended use Only use this appliance: ¡...
  • Page 5 Safety en WARNING ‒ Risk of electric shock! ¡ Incorrect installation is dangerous. ▶ Connect and operate the appliance only in accordance with the specifications on the rating plate. ▶ Always use the supplied power cable for the new appliance. ▶ Connect the appliance to a power supply with alternating current only via a properly installed socket with earthing.
  • Page 6: Safe Use

    en Safety WARNING ‒ Risk of injury! Hinges move when opening and closing the appliance door and can cause injury. ▶ If built-under or integrable appliances are not in a cavity so that one side is accessible, the hinge area must be covered at the side.
  • Page 7 Safety en WARNING ‒ Risk of injury! ¡ Leaving the appliance door open may result in injury. ▶ Only open the appliance door to load or unload tableware in order to prevent accidents, e.g. through tripping. ▶ Do not sit or stand on the appliance door when open. ¡...
  • Page 8: Damaged Appliance

    en Safety Damaged appliance WARNING ‒ Risk of electric shock! ¡ If the appliance or the power cord is damaged, this is danger- ous. ▶ Never operate a damaged appliance. ▶ Never operate an appliance with a cracked or fractured sur- face. ▶ Never pull on the power cord to unplug the appliance. Al- ways unplug the appliance at the mains.
  • Page 9 Safety en WARNING ‒ Risk of harm to health! Children can lock themselves in the appliance, thereby putting their lives at risk. ▶ With redundant appliances, unplug the power cord. Then cut through the cord and damage the lock on the appliance door beyond repair so that the appliance door will no longer close.
  • Page 10: Preventing Material Damage

    en Preventing material damage Only use the water hoses sup- ▶ Preventing material damage Preventing material dam- plied with the appliance or genu- ine spare hoses. Never re-use water hoses that ▶ have been used before. Preventing material damage Safe installation ¡...
  • Page 11: Environmental Protection And Saving Energy

    Environmental protection and saving energy en To prevent corrosion, do not use Zeolith drying ▶ sponge cloths on dishwashers The appliance features a Zeolith con- with a stainless steel front or tainer. Zeolith drying lets you save rinse such cloths thoroughly energy.
  • Page 12: Sensors

    en Installation and connection If automatic door opening is deactiv- Sensors ated, energy consumption increases The sensors adjust the programme and the drying phase is usually sequence and strength in the auto- shortened. matic programmes depending on the → "Overview of basic settings", level and type of soiling.
  • Page 13: Installing And Connecting The Appliance

    Installation and connection en When doing so, check that the Installing and connecting the wastewater hose is not kinked, appliance crushed or twisted. You can position your built-under or Also check that there is no cover integrable appliance in a fitted kit- in the drainage system preventing chen between wooden and plastic the wastewater from being dis-...
  • Page 14 en Installation and connection Insert the non-heating appliance plug of the power cable into the appliance. Insert the mains plug of the appli- ance into a nearby socket. The connection data for the appli- ance can be found on the rating plate.
  • Page 15: Familiarising Yourself With Your Appliance

    Familiarising yourself with your appliance en Familiarising yourself with your appliance Familiarising yourself with your appliance Familiarising yourself with your appliance Appliance You can find an overview of the parts of your appliance here. Rating plate Rating plate with "E number and FD number" → Page 61.
  • Page 16: Controls

    en Familiarising yourself with your appliance "Detergent" → Page 30 is added to the detergent Detergent dispenser dispenser. "Bottom basket" → Page 23 Bottom basket Dispenser for special salt Add special salt to the dispenser for special salt. → "Water softening system", Page 27 Lower spray arm The lower spray arm washes the tableware in the bot- tom basket.
  • Page 17 Familiarising yourself with your appliance en 4 5 6 7 8 9 "Switching on the appliance" → Page 35 ON/OFF button and reset button "Switching off the appliance" → Page 36 "Terminating the programme" → Page 36 "Programmes" → Page 19 Programme buttons Info button If you press , the display shows information about selected programmes, basic settings and additional functions.
  • Page 18 en Familiarising yourself with your appliance   buttons You can use these buttons to scroll between the basic settings. → "Changing basic settings", Page 39 "Changing the basic settings" → Page 39 Setting buttons Door handle Open the appliance door. Display The display shows information about pro- grammes, basic settings or additional functions.
  • Page 19: Programmes

    Programmes en Programmes Programmes You can find an overview of the pro- runtime will change if the rinse aid Programmes grammes that can be selected here. system is switched off or rinse aid Different programmes, which can be needs to be added. found on the control panel of your The consumption values can be appliance, are available depending...
  • Page 20 en Programmes Programme: Programme sequence Additional func- tions Tableware: Particularly gentle: VarioSpeedPlus ¡ Cleaning delicate table- ¡ Pre-Rinse Settings in the Intelligent ware, cutlery, temperat- Home Connect ¡ Cleaning 40 °C ure-sensitive plastics, app are adjustable ¡ Intermediate rinse → "Intelligent glasses and stemware. ", ¡...
  • Page 21: Information For Test Institutes

    Additional functions en Press for 3 seconds. Information for test institutes a The selected programme and the Test institutes are provided with in- additional function will flash. formation for comparability tests, e.g. flashes. according to EN60436. a The programme and the additional These are the conditions for conduct- function are saved.
  • Page 22: Features

    en Features Additional func- Additional func- tion tion ¡ The additional function ¡ To avoid marks and im- can be activated before prove drying, the quant- Shine & Dry the start of the pro- ity of water is increased gramme and at any and the drying phase time when the pro- extended.
  • Page 23: Bottom Basket

    Features en To prevent the basket from sud- Bottom basket denly dropping down, hold the Arrange pans and plates in the bot- side of the basket by the top edge. tom basket. Press in the levers on the right and left on the outside of the basket. Large plates up to a diameter of Raise or lower the basket evenly to 31 cm can be arranged in the bottom...
  • Page 24: Etagere

    en Features Arrange cutlery with the points and sharp edges downwards. You can reorganise the cutlery drawer to make more space for longer/wider items of cutlery. Reorganising cutlery drawer You can fold down the side shelves and front prongs to make more space for longer/wider items of cut- lery.
  • Page 25: Folding Prongs

    Features en Folding prongs glassZone Use the folding prongs to position Use the glassZone in the top basket tableware securely, e.g. plates. to clean all types of glasses gently yet thoroughly. You can fold the prongs down to po- sition pans, bowls and glasses Selecting glassZone better.
  • Page 26: Basket Heights

    en Before using for the first time Pull the tab on the glassZone up Place the glassZone in the top and forwards ⁠ . basket and lock in position ⁠ . Check that the mounts are in the Set the slider to ON. correct position.
  • Page 27: Water Softening System

    Water softening system en Note: If you select Initial start-up To remove any marks from water Home Connect here, make further or other residues, we recommend settings using the Home Connect you operate the appliance without app on your mobile device. tableware before using it for the You can change the settings for first time.
  • Page 28: Setting The Water Softening System

    en Water softening system to the dispenser for special salt Setting the water softening immediately before the pro- system gramme starts. Set the water hardness on your appli- Unscrew the lid of the dispenser ance. for special salt and remove. Determine the water hardness and On initial start-up: Fill the dispenser the appropriate setting value.
  • Page 29: Regeneration Of The Water Softening System

    Rinse aid system en stances. According to manufactur- Additional run time in minutes ers, combined detergents with salt Additional water consumption in replacement substances can gen- litres erally only be used up to a water Additional power consumption in 0.05 hardness of 26 °E without adding special salt.
  • Page 30: Setting The Amount Of Rinse Aid

    en Detergent Add rinse aid up to the max mark. Switching the rinse aid sys- tem off If you find the rinse aid refill indicator irritating, e.g. when using combined detergents with a rinse aid compon- ent, you can switch the rinse aid sys- tem off.
  • Page 31: Unsuitable Detergents

    Detergent en With powder and liquid detergent the Detergent Description dosage can be individually adjusted Tabs Tabs are suitable for all to the level of soiling of the table- cleaning functions and do ware. not need to be measured For better washing and drying results out.
  • Page 32: Information On Detergents

    en Detergent Add the detergent to the dry deter- Detergent Description gent dispenser. Detergent con- Chlorine residue on table- taining chlorine ware may present a risk to 50 ml health. 25 ml 15 ml Information on detergents Follow the instructions on detergents in everyday use.
  • Page 33: Tableware

    Tableware en Close the lid of the detergent dis- Damage to glass and table- penser. ware Only put glasses and china in the dishwasher if it is marked as dish- washer-safe by the manufacturer. Avoid damage to glass and table- ware. Cause Recommendation The following table-...
  • Page 34: Arrange Tableware

    en Tableware To save resources, do not pre- Cause Recommendation rinse tableware under running wa- The water temperat- Select a programme ter. ure of the programme with lower temperat- Observe the following when arran- is too high. ures. ging tableware: After the programme –...
  • Page 35: Removing Tableware

    Basic operation en Removing tableware Setting a programme To adjust the wash cycle to the soil- WARNING ing level of the tableware, select a Risk of injury! suitable programme. Hot tableware can cause burns to the Press the right programme button. skin.
  • Page 36: Starting The Programme

    en Basic operation Starting the programme Terminate programme Press To end a programme early or to ▶ switch from a programme that has a The programme has ended when already started, you will need to can- the display shows "Finished". cel it first. Notes Press for approx.
  • Page 37: Basic Settings

    Basic settings en Basic settings Basic settings You can configure the basic settings for your appliance to meet your needs. Basic settings Overview of basic settings The basic settings depend on the features of your appliance. Basic setting Selection Description Time setting 00:00 - 24:00 Set the current time.
  • Page 38 en Basic settings Basic setting Selection Description Eco forecast Switch EcoCheck on or off. When selecting the programme, the average wa- ter consumption and energy consumption is briefly shown on the display. emotionLight Switch the interior lighting of the appliance on or On via main switch off.
  • Page 39: Changing Basic Settings

    Home Connect  en ¡ → "Connecting the appliance to Changing basic settings WLAN home network (Wi-Fi)", Press ⁠ . Page 40 To open the basic settings, press The Home Connect app guides you for approx. 3 seconds. through the entire login process. Fol- low the instructions in the Home Con- Press repeatedly until the display nect app to configure the settings.
  • Page 40: Home Connect Settings

    en Home Connect Connecting the appliance to WLAN Activating Remote Start home network (Wi-Fi) When you have selected "Manual" in the basic settings of this function, ac- Requirements tivate the function on your appliance. ¡ Home Connect app is installed on your mobile device. Requirements ¡...
  • Page 41: Data Protection

    Cleaning and servicing en Data protection Cleaning and servicing Cleaning and servicing Please see the information on data To keep your appliance working effi- Cleaning and servicing protection. ciently for a long time, it is important The first time your appliance is to clean and maintain it carefully.
  • Page 42: Machine Care

    Dishwasher Care and Ma- ance to malfunction. To avoid such chine Cleaner for Dishwashers online faults and reduce odours, we recom- at https://www.siemens-home.bsh- mend cleaning your appliance at reg- group.com/store or from customer ular intervals. service.
  • Page 43: Filter System

    Cleaning and servicing en Remove any coarse soiling in the After each wash check the filters interior with a damp cloth. for residue. Clean the filters. Turn the coarse filter anticlockwise and remove the filter system ⁠ . Place the machine care product in the appliance interior.
  • Page 44: Cleaning Spray Arms

    en Cleaning and servicing Clean the filter elements under run- Pull up the lower spray arm to re- ning water. move. Carefully clean the rim of dirt between the coarse and the fine fil- ter. Re-assemble the filter system. Make sure that the locking catches on the coarse filter click into posi- tion.
  • Page 45: Troubleshooting

    Troubleshooting en Troubleshooting Troubleshooting You can rectify minor faults on your appliance yourself. Read the troubleshoot- Troubleshooting ing information before contacting after-sales service. This will avoid unneces- sary costs. WARNING Risk of electric shock! Incorrect repairs are dangerous. Repairs to the appliance should only be carried out by trained specialist ▶...
  • Page 46: Error Code / Fault Display / Signal

    en Troubleshooting Fault Cause Troubleshooting Appliance door opens too Door is not correctly adjus- Adjust the appliance door as de- ▶ wide at the end of the pro- ted. scribed in the installation instruc- gramme. tions. The door gap must be at least 70 mm - 100 mm.
  • Page 47 Troubleshooting en Fault Cause Troubleshooting E:3200 or indicator for wa- Unscrew the water connection. ter supply lights up. Remove the filter from the supply hose Clean the filter. Re-insert the filter in the supply hose. Screw the water connection back Check the water connection for leaks.
  • Page 48: Washing Results

    en Troubleshooting Fault Cause Troubleshooting E:9001 lights up. Mains voltage is too low. This is not a fault on the appliance. Contact an electrician. Have the mains voltage and elec- trical installation checked by an electrician. E:9240 lights up. Filters are soiled or blocked. Clean the filters.
  • Page 49 Troubleshooting en Fault Cause Troubleshooting Tableware is not dry. Water collects in recesses of Position tableware at an angle ▶ the tableware or cutlery. where possible. The combined detergent Use rinse aid to improve drying per- used has a poor drying per- formance.
  • Page 50 en Troubleshooting Fault Cause Troubleshooting Appliance interior still wet Not a fault. The condensa- No action required. after wash cycle. tion drying principle causes water droplets in the tub – they are indeed desirable here. The moisture in the air condenses on the inside walls, runs off and is pumped out.
  • Page 51 Troubleshooting en Fault Cause Troubleshooting Detergent residue in the ap- Lid of the detergent dis- Arrange tableware in the top basket pliance penser is blocked by items tableware so the tab collecting tray of tableware parts and will is not obstructed by tableware. → "Arrange tableware", Page 34 not open.
  • Page 52 en Troubleshooting Fault Cause Troubleshooting Stubborn white coatings are Detergent substances are Change your "detergent" ▶ → Page 30. present on tableware, inside deposited there. These coat- the appliance or the door. ings cannot generally be re- Clean the appliance mechanically. ▶ moved with chemicals. The hardness range is set in- Set the Water softening system to ▶...
  • Page 53 Troubleshooting en Fault Cause Troubleshooting Coloured coatings (blue, yel- You can remove deposits with "Mechanical cleaning" → Page 41 low, brown) that are difficult or impossible to remove are or a machine cleaning product. It present inside the appliance may not always be possible to com- or on stainless steel table- pletely remove deposits but they ware.
  • Page 54 en Troubleshooting Fault Cause Troubleshooting Removable streaks are Tableware has been pre- Only remove large remnants of food ▶ present on glasses, glass- cleaned too intensely. The and do not prerinse tableware. ware with a metallic appear- sensors chose a weaker pro- Adjust the sensitivity of the sensors.
  • Page 55: Home Connect Problem

    Troubleshooting en Fault Cause Troubleshooting Excessive formation of foam Detergent or appliance care Change the brand of detergent. ▶ occurs. product used causes excess- ive foaming. Home Connect problem Fault Cause Troubleshooting Connection to home net- WLAN on router is not act- Check the wireless network con- ▶...
  • Page 56 en Troubleshooting Fault Cause Troubleshooting → "Terminate programme", Water is left in the appliance ▶ at the end of the pro- Page 36 gramme. Appliance cannot be Software update is taking Wait until the software update has ▶ switched on or operated. place. finished.
  • Page 57: Mechanical Damage

    Troubleshooting en Fault Cause Troubleshooting All LEDs lit up or flashing. Electronics have detected a Press the main switch button for ap- fault. prox. 4 seconds. → "Controls", Page 16 The appliance is reset and restar- ted. If the problem occurs again: Switch off the appliance. ‒...
  • Page 58 en Troubleshooting Fault Cause Troubleshooting Knocking or rattling noise. With a small load the water Distribute the tableware evenly. ▶ jets directly strike against Load the appliance with more table- ▶ the tub. ware. Light items of tableware Position light items of tableware se- ▶...
  • Page 59: Clean Wastewater Pump

    Transportation, storage and disposal en Insert the pump cover and press Clean wastewater pump down ⁠ . Large remnants of food or foreign bodies can block the waste water pump. As soon as the rinsing water no longer drains properly, the waste water pump must be cleaned.
  • Page 60: Protect Appliance From Frost

    en Customer Service Protect appliance from frost Disposing of old appliance If there is a risk of frost where the ap- Valuable raw materials can be re- pliance will be standing, e.g. in a holi- used by recycling. day home, empty the appliance com- pletely.
  • Page 61: Product Number (E-Nr.), Produc- Tion Number (Fd) And Consecut- Ive Numbering (Z-Nr.)

    Technical specifications en least 10 years from the date on from water damage, the appliance which your appliance was placed on must be connected to the power the market within the European Eco- supply. nomic Area. ¡ The liability guarantee is valid for the service life of the appliance.
  • Page 62: Information Regarding Free And Open Source Software

    (Please search on the product requirements. website for your appliance model A detailed Declaration of Conformity and additional documents). Alternat- can be found online at www.siemens- ively, you can request the relevant in- home.bsh-group.com/uk/ among the formation from oss- additional documents on the product request@bshg.com or BSH Hausger-...
  • Page 63 Declaration of Conformity en 5 GHz band (5150–5350 MHz + 5470–5725 MHz): Max. 100 mW UK (NI) 5 GHz WLAN (Wi-Fi): For indoor use only. 5 GHz WLAN (Wi-Fi): For indoor use only.
  • Page 64 Valid within Great Britain: Imported to Great Britain by BSH Home Appliances Ltd. Grand Union House Old Wolverton Road Wolverton, Milton Keynes MK12 5PT United Kingdom Manufactured by BSH Hausgeräte GmbH under the trademark licence of Siemens AG *9001716899* 9001716899 (020127) 650 P5...

Table of Contents