Cutlery Drawer; Before Using For The First Time; Performing The Initial Config- Uration - Siemens SN63HX02CE Information For Use

Table of Contents

Advertisement

Push the lever forwards
1.
down the prongs
To use the prongs again, fold them
2.
back up.
The prongs audibly click into posi-
a
tion.
8.6 Cutlery drawer
Arrange cutlery in the cutlery drawer.
Arrange cutlery with the points and
sharp edges downwards.
and fold
⁠ .
1
2
Before using for the first time en

Before using for the first time

9 Before using for the
first time
Before using for the first time
9.1 Performing the initial con-
figuration
On initial start-up or after a reset to
the factory settings, you will need to
make settings.
Tip: Connect your appliance to a mo-
bile device. You can conveniently
change all settings via the
Home Connect app.
Requirement: The appliance has
been installed and connected.
→ Page 11
Add special salt. → Page 25
1.
Add rinse aid. → Page 26
2.
Switch on the appliance.
3.
→ Page 32
Setting the water softening system.
4.
→ Page 24
Set the amount of rinse aid to be
5.
dispensed. → Page 27
Add detergent → Page 27.
6.
Start the Programme with the
7.
highest cleaning temperature
without tableware.
To remove any marks from water
or other residues, we recommend
you operate the appliance without
tableware before using it for the
first time.
Tip: You can change these settings
and other Basic settings → Page 35
at any time.
23

Advertisement

Table of Contents
loading

Table of Contents