Cutlery Drawer; Before Using For The First Time; Performing The Initial Configuration - Siemens SR93EX24MG Information For Use

Table of Contents

Advertisement

en Before using for the first time
Push the lever forwards
1.
down the prongs
To use the prongs again, fold them
2.
back up.
The prongs audibly click into posi-
a
tion.
9.5 Cutlery drawer
Arrange cutlery in the cutlery drawer.
Arrange cutlery with the points and
sharp edges downwards.
Reorganising cutlery drawer
You can fold down the folding spines
to make more space for wider items
of cutlery.
24
and fold
⁠ .
1
2
To fold down the folding spines,
push the lever forwards and fold
down the folding spines

Before using for the first time

10 Before using for the
first time
Before using for the first time
10.1 Performing the initial
configuration
On initial start-up or after a reset to
the factory settings, you will need to
make settings.
Tip: Connect your appliance to a mo-
bile device. You can conveniently
change all settings via the
Home Connect app.
Requirement: The appliance has
been installed and connected.
→ Page 12
Add special salt. → Page 26
1.
Add rinse aid. → Page 27
2.
Switch on the appliance.
3.
→ Page 33
Setting the water softening system.
4.
→ Page 25
Set the amount of rinse aid to be
5.
dispensed. → Page 28
Add detergent → Page 28.
6.
Start the Programme with the
7.
highest cleaning temperature
without tableware.
⁠ .

Advertisement

Table of Contents
loading

Table of Contents