Eneo IPC-52A0003M0A User Manual page 57

Full Menu Setup
3-7-2. Date & Time
Refer to the menu 'Quick Setup > Date & Time'.
3-7-3. Network
TCP/IP
●
1) IPv4 Address:
The DHCP (Dynamic Host Configuration Protocol) server has a feature that
automatically assigns an IP address to the device if there is a device on the
network.
> Obtain IP address via DHCP server: Select the choice box if you want to assign
the IP address from DHCP server automatically, and then the remaining setting
are read-only text.
> Use the following IP address:
Select the choice box if you want to assign the IP address manually.
- IP address:
The address of the camera connected to the network. Specify a unique IP
address for this network camera.
- Subnet mask:
The address that determines the IP network that the camera is connected to
(relative to its address). Specify the mask for the subnet the network camera
is located on.
- Gateway:
The gateway that accesses other networks. Specify the IP address of the
default router (Gateway) used for connecting devices attached to different
networks and network segments.
57