Pppoa - D-Link DSL-2878 User Manual

Ac750 dual-band vdsl2/adsl2+ modem router

Table of Contents

Section 4 - Configuration

Select PPPoA if your ISP provides and requires you to enter a PPPoA username

and password in order to connect to the Internet. For ADSL connections only.

WAN Settings

Connection:

Select PPPoA.

WAN Service Type:

Select a service type from the list. As of this writing, only Internet is

supported for manual configuration.

Username:

Enter the username provided by your ISP.

Password:

Enter the password provided by your ISP.

Connection Type:

Select PPPoA LLC or PPPoA VC-Mux.

IP Control:

Select Dynamic IP Address or Static IP Address.

If you selected Static IP Address, the following option is available:

Static IP Address:

Enter the IP address provided by your ISP.

MTU:

Maximum Transmission Unit - you may need to change the MTU for

optimal performance with your ISP.

NAT Enable:

Enable or disable Network Address Translation.

Authentication

Select the authentication protocol your ISP uses. The options are

Protocol:

Auto, PAP, or CHAP.

D-Link DSL-2878 User Manual

PPPoA

Table of Contents

Show Quick Links

Table of Contents