D-Link DSL-2880AL Quick Installation Manual

QUICK INSTALLATION GUIDE
Dual Band
Wireless AC1200
ADSL2+ Modem Router
DSL-2880AL
Package Contents
Dual Band Wireless AC1200 Gigabit ADSL2+ Modem Router (DSL-2880AL)
Power Adapter
Ethernet Cable
ADSL2+ Microfilter/Splitter
Quick Install Guide
If any of the above items are missing, please contact your reseller/retailer.
Hardware Overview
1 3 5 7
13 15
2 4 6 8
9 10 11 12 14 16
1 Power LED A solid green light indicates a proper connection to the power supply.
A solid green light indicates a connection to a Gigabit Ethernet device
2 LAN (1~4) LEDs while an amber light indicates a connection to a 10/100 device. The
LED will blink during data transmission.
A solid green light indicates that the 2.4G wireless segment is ready
3 Wireless LED while an amber light indicates that the 5G wireless segment is ready.
The light will blink during data transmission.
4
WPS LED The light will blink during the WPS process.
5
USB LED A solid green light indicates a connection to a USB device.
A solid green light indicates a WAN connection to a Gigabit Ethernet
device, an amber light indicates a connection to a 10/100 device and
6
WAN LED
both green and amber indicates a connection to a 10Mbps device . The
LED will blink during data transmission.
A solid green light indicates a proper connection to the ADSL enabled
7 ADSL LED
telephone line.
A solid green light indicates a proper connection to your broadband
8 Internet LED
service. The light will blink during data transmission.
Connect to an ADSL enabled telephone line and the supplied
9
ADSL Port
microfilter/splitter.
Connect to an Ethernet WAN service (e.g. NBN/UFB). The LED will blink
10 WAN Port
during data transmission.
Connect Ethernet devices such as computers, switches, and game
11
LAN (1~4) Ports
consoles.
12 USB Port Connect USB devices such as printers, scanners or storage.
13 WiFi Buttons Press for three seconds to enable/disable 2.4G or 5G wireless networks.
Press and hold the reset button with a paper clip for ten seconds to
14 Reset Button
reset the router to the factory default settings.
15 Power Button Press to turn on or off the device.
16 Power Port Connect the supplied power adapter.
Minimum Requirements
Internet Requirements:
• An activated ADSL telephone line and account with an Internet provider
Web-based Configuration Requirements:
Device with the following:
• An installed Ethernet adapter or wireless adapter
Supported Browsers:
• Internet Explorer 7 or higher
• Safari 4 or higher
• Chrome
• Firefox
Link'n Print Utility Requirements (optional):
• Windows XP/Vista/7/8
• Mac OS X (10.5, 10.6, 10.7, 10.8)
Before you Start
• Internet Provider Account Details - If you are using an Australian or New
Zeleand ADSL connection, you will need your user name and password. If you do
not have this information, contact your Internet provider.
Do not proceed until you have this information.
Connect your Modem Router
1
Connect your existing Phone cable from the telephone outlet to the LINE
port on the Microfilter and your telephone handset into the PHONE port.
LINE Telephone Outlet
PHONE
Microfilter
Connect the Phone cable from the DSL port on the Microfilter to the ADSL
2
port of the modem router.
DSL-2880AL
Microfilter
Phone Cable
3 Connect the Ethernet cable from the LAN port of the modem router to the
Ethernet port on your computer.
Computer
Ethernet Cable
DSL-2880AL
Plug the power adapter into your modem router and connect to an available
4
power outlet.
DSL-2880AL
Power Adapter
Computer
After the modem router has powered up, verify that the Power and ADSL
5
LEDs are both lit.
6
Continue with the Configuration section on the other side of this document.