Formatted Capacity; Lba Mode - Seagate Video 2.5 HDD Product Manual

Table of Contents

Advertisement

Table 1
Drive Specifications Summary (continued)
Drive Specification
Non-Operational Shock
Vibration, operating
Vibration, nonoperating
Nonrecoverable read errors
Annualized Failure Rate (AFR)
Rated workload
Warranty
Load-unload cycles
Supports Hotplug operation per the
Serial ATA Revision 3.2 specification
1.
One GB equals one billion bytes when referring to hard drive capacity. Accessible capacity may vary depending on operating environment and formatting.
If the drive is powered-off before issuing flush cache command, in some instances,
Note
the end user data in the DRAM cache might not be committed to the disk.
2.1

Formatted Capacity

Model
Formatted Capacity
500GB model
500 GB
320GB model
320 GB
250GB model
250 GB
1.
One GB equals one billion bytes when referring to hard drive capacity. Accessible capacity may vary depending on operating environment and formatting.
2.1.1

LBA mode

When addressing these drives in LBA mode, all blocks (sectors) are consecutively numbered from 0 to n–1, where n is the number of guaranteed
sectors as defined above.
Refer to
Configuring and Mounting the Drive
of drives with capacities over 137 GB.
Seagate Video 2.5 HDD Product Manual, Rev. J (Draft 1)
ST500VT001
Average annualized workload rating: <55 TB/year.
The specifications for the product assumes the I/O workload does not exceed the average annual-
ized workload rate limit of 55 TB/year. Workloads exceeding the annualized rate may degrade and
impact reliability as experienced by the particular application. The average annualized workload
rate limit is in units of TB per calendar year.
To determine the warranty for a specific drive, use a web browser to access the following web page:
http://www.seagate.com/support/warranty-and-replacements/
From this page, click on the "Is my Drive under Warranty" link. The following are required to be pro-
vided: the drive serial number, model number (or part number) and country of purchase. The sys-
tem will display the warranty information for the drive.
(1)
Guaranteed Sectors
976,773,168
625,142,448
488,397,168
on page 19
(words 60-61 and 100-103) for additional information about 48-bit addressing support
ST500VT000
ST320VT000
1000 Gs at 1 ms max
5–200 Hz: 2.0 Gs
201–500 Hz: 1.0 Gs
5–500 Hz: 5.0 Gs
14
1 per 10
bits read
0.55%
600,000 at 25°C, 50% rel. humidity
Yes
Bytes per Sector
512 (logical) / 4096 (physical)
Drive Specifications
ST250VT000
8

Advertisement

Table of Contents
loading

This manual is also suitable for:

St500vt000St500vt001St320vt000St250vt000

Table of Contents