Table of Contents
Advertisement
DVD player unit (Continued)
Symptom
Playback will not start even after a title is se-
lected.
The parental level cannot be changed.
The voice or subtitle language selected in the
initial setting is not played.
Menu screen messages are not shown in the
desired language.
A VCD cannot be played using menus.
Remote control unit
Symptom
Remote control operation is not possible.
Inhibition icon
Symptom
The inhibition icon is displayed
and remote control is not pos-
sible.
34
EN
Cause
÷ A viewing restriction (Rating) has been set
for the disc.
÷ You have forgotten the password.
÷ The DVD disc being played does not contain
the recording of the selected voice or subtitle
language.
÷ The initial playback language is specified by
the DVD disc.
÷ The DVD specifications provide for selection
at the menu screen.
÷ The menu language function (MENU) is not
set to desired language.
÷ The VCD disc being played is not compatible
with P.B.C.
Cause
÷ Batteries are exhausted.
÷ The remote control is too far away from the
system, the controlling angle is deviated or
there is an obstacle in between.
Cause
÷ Playback is restricted intentionally by the
software producer.
In case of difficulty
Remedy
÷ Check the viewing restriction level (Rating)
setting.
÷ Set the initial setup to the factory setup
with the following procedure.
1 Press the SETUP key on the remote to
display the Setup menu.
2 Input the 6-digits number "210499" and
the password is cleared.
3 Enter a new code.
÷ Use a DVD disc containing the recording of
the selected voice or subtitle language.
÷ Press SUBTITLE or the AUDIO key on the
remote and select the language.
÷ Select at the menu screen of the disc.
÷ Select disc menu language.
÷ Menu playback is available only with VCD
discs recorded with P.B.C.
Remedy
÷ Replace with new batteries.
÷ Operate the unit inside the remote control-
lable range.
Remedy
÷ The operation is inhibited. Please try an-
other operation.
*
(
•ª
&
Advertisement
Table of Contents
