Connection Diagrams; Install The Hardware; Route The Cables - Axis Q35-VE Series Installation Manual

Connection Diagrams

I/O Connector
1
0 V DC (-)
2
DC output 12 V, max 50 mA
A
I/O configured as input
B
I/O configured as output

Install the Hardware

Route the cables

• If you want to route the cables along the wall, seepage 17.
• If you want to route the cables through the wall, see page 19.
• If you are attaching a pipe to the mounting bracket, see page 20
• If you are using a conduit adapter to route the cables along the wall, see the Installation
Guide delivered with the conduit adaptor.
Route the cables along the wall
1. Use the drill template to drill four holes for the mounting bracket.
2. Remove the locking clip and the side lid.
AXIS Q35-VE Series
17