Random Play; Repeat Play; Intro Scan (For Cd Only); Recording On A Usb Device (For Cd Only) - Kenwood M-707i-B Instruction Manual

Compact hi-fi component system
Table of Contents

Advertisement

Random play

You can play all the tracks/fi les in random order.
1
During playing, pause or stop mode, press
RANDOM button to enable random play mode.
The icon "RDM" appears on the display.
2
To exit random mode, press RANDOM button
again.
The icon "RDM" disappears from the display.

Repeat play

You can play the current track/fi le/album or the
whole disc/USB device repeatedly.
Press REPEAT button in play or pause mode.
Every time the button is pressed, the repeat play
changes in the following order:
For CD :
Repeat mode
Repeat a single track
Repeat all the tracks *
1
Repeat off
For audio fi le :
Repeat mode
Repeat a single file
Repeat one album *
2
Repeat all the files *
1
Repeat off
1
• *
All tracks/files are repeated continuously.
• *
2
This function cannot be used in program mode.

Intro scan (For CD only)

This function let you listen to the fi rst 10 seconds of
each track throughout the CD.
Press INTRO button to start scanning.
The icon "INTRO" appears on the display.
To stop the intro scan
Press INTRO button again.
The unit enters normal play mode and starts
playing from where you stop the scanning.
Recording on a USB device (For CD
only)
Records songs in the CD to the USB device in MP3
format.
1
2
3
4
• During recording, it is not possible to listen to another source.
Icon
• The recorded music files and folders accommodating them
"REP. "
are numbered automatically. These number can later be
"REP. ALL"
modified.
– Numbers assigned to folders: AL_A01...AL_A99...AL_Z99
– Numbers assigned to music files: A01_001.mp3, A01_002.
mp3.../ A99_001.mp3.../ Z99_001.mp3...
Icon
– Example
"REP. "
"REP. ALB. "
"REP. ALL"
• Music is encoded according to specification below.
– Format: MP3
– Transfer bit rate: 192 kbps
– Sampling frequency: 44.1 kHz
• Recordable USB device
– USB standard: USB 1.1/2.0
– File system: FAT 16/32
Insert a USB device to the USB connector on the
front panel.
To record all the tracks:
Stop playback.
To record a single track:
Play the track to be recorded.
Press USB O.T.E. [USB O.T.E.] button to begin
recording.
The icon "SYNC USB REC" appears on the display.
To end recording, press 7 [7 stop] button.
KWD
CD-1
AL_A01
CD-2
AL_A02
A01_001.mp3
A01_010.mp3
A02_001.mp3
15
English

Advertisement

Table of Contents
loading

This manual is also suitable for:

M-707i

Table of Contents