Operating Other Devices; Programming The Remote To Operate Other Devices; Device Code Setup - Toshiba 24SL415U Owner's Manual

Operating other devices

Your TV remote control has one dedicated TV mode
and three programmable multi-brand modes: CABLE/
SAT, BD/DVD, and AUX.
Note: To operate a non-Toshiba device or a Toshiba
device that the remote control is not preprogrammed
to operate, you must program the remote.
Default device mode control
Mode select
(before programming)
TV Toshiba TV
CABLE/SAT Toshiba Satellite receiver
BD/DVD Toshiba Blu-ray Disc
AUX Onkyo Receiver
Device mode control
Mode select
(after programming)
TV Toshiba TV
CABLE/SAT
BD/DVD Multi-brand video/audio devices
AUX
Note: If you cannot program the TV's remote to operate
your device or some of its features, use the device's
remote or the controls on the device.
Chapter 10: Appendix
Programming the remote to
operate other devices

Device code setup

1無
2無
3無
™ player
4無
5無
6無
7無
Note: Every time you change the batteries, you must
reprogram the remote.
Find the code for your device brand in the remote
control device code table (
If multiple codes are listed, try each one
separately until you find one that works.
Press a mode select button (CABLE/SAT, BD/DVD,
or AUX).
While holding down
for your device.
Point the remote at the device. Press to test the
code.
Result Meaning
The device responds. Valid code
Invalid code
The device does not
Repeat the procedure, using
respond.
another code
When programming is complete, test all necessary
keys on the TV's remote that operate your device.
If some keys are not operational, repeat the device
code setup using another code (if other codes are
listed for your device).
To control the TV, press TV.
If your VCR does not respond to the codes for
your VCR brand, and has a switch labeled VCR1/
VCR2, set the switch to the other position, then
program the remote control.

page 82–87).
, input the 4-digit code
79