Navigating The Menu System - Toshiba 24SL415U Owner's Manual

6無
Start Scan
Auto Tuning
Start Scan
Press
Note: If you want to stop scanning, press
while scanning.
After scanning is complete, a channel list screen
•
(such as the one below) will appear. Press
.
Note: Encrypted channels cannot be registered
though these are displayed in the above list.
If some channels are not found after scanning:
Check the antenna/cable connections, and scan
•
again.
Connect the TV to the antenna or cable box directly
•
and scan again.
1無
> Settings > SETUP > Quick Setup >
2無
A confirmation message appears. Press t or u
to select Yes . Press
3無
Repeat set up to Step 6.
If you selected Antenna previously, select
•
Cable.
If you selected Cable previously, select
•
Antenna.
4無
Scan again.
7無
Support Information
The Support Information screen appears. Press
Note: Refer to this information if there is any
problem and you need to contact Customer
Support. This can be confirmed from the
following operation at any time.
> Settings > SETUP > System Information >
.
26
Chapter 4: Initial Setup and Menu
.
or
.
.
.

Navigating the menu system

To open the main menu, press
•
control or TV control panel.
Press p, q, t, or u on the remote control or TV
•
control panel to navigate and make selections.
To select a menu option, press
•
To move to the next menu layer, press
•
To return to the previous menu layer, press
•
To close a menu instantly, press
•
All menus will close automatically if you do not make
•
a selection within 60 seconds.
on the remote
.
or p.
or q.
or .