Initial Setup
When you first turn on or reset the TV, the Initial
Setup window will appear.
Note:
You can stop Initial Setup by pressing
•
However, if you do not finish Initial Setup, the
Initial Setup screen will appear every time
you turn on your TV. To finish Initial Setup, see
"Changing Initial settings" ( page 29).
does not work until Menu Language,
•
Time Zone, and Location have been set.
1無
Menu Language
2無
Time Zone
Local Time Setting
Time Zone
Daylight Saving Time
3無
Daylight Saving Time
Local Time Setting
Time Zone
Daylight Saving Time
4無
Location
Location
To use the TV for displaying in a store showroom, please
select [Store]. [Home] mode is recommended for normal use.
(ENERGY STAR® qualified)
Select Home for normal home use. Press
Chapter 4: Initial Setup and Menu
.
Select a language.
Eastern
Off
Select a time zone.
Eastern
Off
Select On or Off. Press
Home
5無
ANT/CABLE
To select Antenna:
First, select
Antenna.
Select Auto, Digital, or Standard ( "Setting the
Channel Tuning Mode" on page 33). Press
To select Cable:
First, select
Cable.
Note: If you do not want to scan channels, you
do not need to make a selection for ANT/CABLE.
Select Next and press
.
.
Then, select Next. Press
Then, select Next. Press
to skip this step.
25
.
.
.