Hdmi ® Cec Control Input Source Selection; Adjusting The Amplifier's Audio; Other Hdmi ® Cec Control Functions - Toshiba 24SL415U Owner's Manual

HDMI CEC Player Control menu functions:
®
1無
Press to open the Quick menu.
2無
Select HDMI-CEC Player Control. Press
3無
Press p or q to select the item you want to control
and press .
Item Description
Power Turns the selected device on and off.
Accesses the selected device's top
Root Menu
menu.
Contents Accesses the contents list when you
Menu press .
Setup
Accesses the device's setup menu.
Menu
Note:
• These functions depend on the connected devices.
• The HDMI-CEC Player Control item is not available
under these conditions:
- A non-HDMI input is selected.
- The Enable HDMI-CEC Control item is set to Off.
- The connected HDMI
®
or recording device.
HDMI CEC Control input source
®
selection
If an HDMI ® CEC device with HDMI switching
capability (e.g. an amplifier) is connected to the
HDMI input, you can select another HDMI
device that is connected to the master HDMI device.
Use on the remote control or the control panel
( page 35).
Chapter 6: Basic features
.
CEC device is not a playback
CEC
®

Adjusting the amplifier's audio

Using the TV's remote control, you can adjust or mute
the sound volume of your amplifier.
•
adjust the volume level.
•
turns off the sound.
1無
> Settings > PREFERENCES > HDMI-CEC
Control Setup >
.
2無
Press p or q to highlight Speaker Preference.
3無
Press t or u to select Amplifier.
Note: Confirm that a connected HDMI
device (such as DVD player, etc.) is selected
for the Amplifier input source.
Note:
• You can also use this function when the amplifier
is connected to the TV's DIGITAL AUDIO OUT
terminal (not HDMI connection). Select a digital
audio input mode on the amplifier.
• These functions depend on the device
connected.
Other HDMI CEC Control functions
®
When Enable HDMI-CEC Control and all items in
the HDMI-CEC Control Setup menu are set to On, the
following functions will be enabled.
Item Description
TV Auto If a HDMI
®
Power the TV turns on automatically.
If the TV is turned off, it will send a
Auto
message to turn off all of the HDMI
Standby
CEC devices connected to the TV.
If Amplifier Control is set to On, you
Amplifier
can adjust the sound volume or turn off
Control
the sound using the remote control.
From this item, you can set your audio
output preference to the TV speakers
or the amplifier. When this item is set
to Amplifier, the remote control can be
Speaker
used to adjust or mute the volume of the
Preference
audio. This item will not be available
and set to TV Speakers automatically
unless a HDMI
receiver is connected.
Note: When you turn on the amplifier, change
its input source, or adjust the sound volume, the
sound will be output from the amplifier's speakers
even if TV Speakers has been selected. Turn the
TV off and on again to output the sound from the
TV speakers.
CEC
®
CEC device is turned on,
®
CEC compatible audio
®
41