Setting Up The Network; Wireless Setup - Toshiba 24SL415U Owner's Manual

Setting up the Network

You can select the Network Type.
1無
> Settings > PREFERENCES > Network
Setup > .
(Another: > Network > Network Setup >
2無
Press p or q to highlight Network Type.
3無
Press t or u to select Wired or Wireless.
4無
If you select Wired, see "Advanced Network
Setup" ( page 58).
If you select Wireless, see the next section.

Wireless Setup

Note:
• Continued AP (Access Point) connection is
not guaranteed. Connection may be lost while
watching TV.
There are 3 methods for wireless setup:
• Easy Setup (WPS)
If the AP supports WPS, this can be used.
−WPS is a standard designed to simplify the
connection of wireless LAN equipment and
the setup of network security features.
• Assisted Setup (setup using the AP's notification
information)
Network Name, Authentication, and Encryption are
decided based on information from the AP. You need
to manually set the Security Key.
• Manual Setup (to input all settings)
Easy Setup using PBC (Push Button Configuration)
1無
> Settings > PREFERENCES > Network Setup
> .
2無
Press p or q to select Wireless Setup. Press
3無
Press p or q to select Easy Setup. Press
4無
Press t or u to select PBC.
5無
Press q to select Start Scan. Press
6無
Following the onscreen instructions, push the
appropriate button on your AP.
7無
When a screen reporting that the setup has
succeeded appears, press
To cancel searching for the AP:
Press while searching for the AP. A message
will appear. Press t or u to select Yes. Press
56
Chapter 8: Advanced features
.)
.
.
.
.
.
Easy Setup using a PIN (Personal Identification
Number)
1無
> Settings > PREFERENCES > Network Setup
> .
2無
Press p or q to select Wireless Setup. Press
3無
Press p or q to select Easy Setup. Press
4無
Press t or u to select PIN.
5無
Press q to select Start Scan. Press
6無
Scan screen appears. Enter the PIN displayed on
this screen into your PC or AP.
7無
Press p or q to select the desired AP. Press
Note: Check the MAC address on the label
or in the manual of the AP and select an AP.
8無
When a screen reporting that the setup has
succeeded appears, press
To cancel searching for the AP:
Press while searching for the AP. A message
will appear. Press t or u to select Yes. Press
Assisted Setup
1無
> Settings > PREFERENCES > Network Setup
> .
2無
Press p or q to select Wireless Setup. Press
3無
Press p or q to select Assisted Setup. Press
4無
Press p or q to select the desired AP. Press
Note: Check the MAC address on the label
or in the manual of the AP and select an AP.
5無
Select Security Key. Press
Keyboard appears.
6無
Input the Security Key using the Software
Keyboard ( page 59). To save your settings,
press the BLUE button.
Note: The Security Key must adhere to these
conditions:
− TKIP/AES: 8-63 ASCII or 64 Hex characters
− WEP: 5 or 13 ASCII or 10 or 26 Hex characters
7無
Select Done. Press
Note: Settings are not saved if
before Done is selected.
.
.
.
.
. The Software
.
is pressed
.
.
.
.
.