Connecting An Hdmi ® Or Dvi Device To The Hdmi Input - Toshiba 24SL415U Owner's Manual

Connecting an HDMI
device to the HDMI input
The HDMI input on your TV receives digital audio
and uncompressed digital video from an HDMI
source device, or uncompressed digital video from a
DVI (Digital Visual Interface) source device.
This input is designed to accept HDCP (High-
Bandwidth Digital-Content Protection) program
material in digital form from EIA/CEA-861-D–
compliant consumer electronic devices (such as
[1]
a set-top box or DVD player with HDMI or DVI
output).
The HDMI input can accept and display VGA,
SVGA, XGA, WXGA, SXGA, 480i (60Hz), 480p
(60Hz), 720p (60Hz), 1080i (60Hz), and 1080p
(24Hz/60Hz) signal formats. For detailed signal
specifications, see page 76.
Supported Audio format: Linear PCM, sampling rate
32/44.1/ 48 kHz
Note:
• To connect a PC to the HDMI input, see page 20.
• Some legacy HDMI sources may not work properly with
your HDMI TV due to the adoption of new standards.
Try setting the following options (INSTAPORT™ and
RGB Range) to Off ( page 42).
To connect an HDMI device, you will need:
HDMI cable (type A connector) per HDMI device
•
− For proper operation, it is recommended that
you use an HDMI cable with the HDMI Logo
( ).
− To display an 1080i/60Hz signal format, you
will need a High Speed HDMI cable.
A conventional HDMI/DVI cable may not
work properly.
− HDMI cables transfer both video and audio.
Separate analog audio cables are not
required (see illustration).
TV back panel
4
3
HDMI device
18
Chapter 2: Connecting your TV
or DVI
®
24SL415U has no
HDMI 4 input
1
2
HDMI cable
To view the HDMI device video:
Select the HDMI 1, HDMI 2, HDMI 3, or HDMI 4
(except 24SL415U) video input source on the TV.*
* To select the video input source, press
the remote control ( page 24). To program the
TV remote control to operate other devices, see
Chapter 3.
To connect a DVI device, you will need:
HDMI-to-DVI adapter cable
•
− For proper operation, the length of an HDMI-
to-DVI adapter cable should not exceed 9.8 ft
(3m). The recommended length is 6.6 ft (2m).
3.5mm Stereo to RCA Y-Cable
•
− An HDMI-to-DVI adapter cable transfers
video only. Separate analog audio cables
are required (see illustration).
TV back panel
24SL415U has no
HDMI 4 input
4
1
PC/HDMI 3
3 2
(AUDIO)
DVI device
VIDEO AUDIO
L R
IN
IN
OUT
L R
Note: To ensure that the HDMI or DVI device is reset
properly:
• When turning on your electronic components,
turn on the TV first, and then the HDMI or
DVI device.
• When turning off your electronic components,
turn off the HDMI or DVI device first, and
then the TV.
[1] EIA/CEA-861-D compliance covers the
transmission of uncompressed digital video
with high-bandwidth digital content protection,
which is being standardized for reception of
high-definition video signals. Because this is
an evolving technology, it is possible that some
devices may not operate properly with the TV.
on
HDMI-to
Analog
-DVI
audio cable
adapter
cable
DVI/HDCP
OUT