Displaying Tv Status Information; Understanding The Last Mode Memory Feature - Toshiba 19SL410U Owner's Manual

5
To save the new settings, highlight Done and press
. To revert to the factory defaults, highlight
Reset and press .

Displaying TV status information

To display TV status information using
RECALL:
Press on the remote control.
The following information will display (if
applicable):
• Current input (ANT/CABLE, Video, etc.)
• If ANT/CABLE is the current input, either
"CABLE" (for cable TV) or "ANT" (for over-the-
air broadcasts).
• Channel number (if in ANT/CABLE mode)
• Channel label (if applicable)
• Digital signal strength indicator (bar graph in lower
right corner of box; for ATSC signal only)
• Stereo, Mono, or SAP audio status (when HDMI
input mode, Dolby Digital or PCM)
• Video resolution
• Aspect ratio of incoming video signal (4:3 or 16:9)
• V-Chip rating status
• Game Timer (if set)
To close the RECALL screen:
Press again.
To display TV status information using
INFO:
Press on the remote control.
The following additional information will display for
off air digital channels (if applicable):
• Title
• Duration
• Detailed description
Note: The location of the banner can be moved
to the top or bottom of the screen by pressing
50
Chapter 6: Using the TV's features
or while the RECALL or INFO display is
onscreen.
Understanding the last mode
memory feature
If power is lost while you are viewing the TV, the
Last Mode Memory feature automatically turns on
the TV when power is restored.
Note: If you will be away from the TV for an
extended period of time you should unplug the
power cord.