Displaying Tv Status Information; Understanding The Auto Power Off Feature; Understanding The Last Mode Memory Feature - Toshiba 40E200U1 Owner's Manual

MLB Young s xxx 9 OOpm' 11 OOpm EST
Today s MOlar league Baseball
1-·· ..
C-¥U41l
, ;
.
Note: The location of the banner can be moved
to the top or bottom of the screen by pressing .6.
or
~
while the RECALL or INFO display is on-
screen.
Understanding the auto power off
feature
Note: If you select
Enable REGIA-LINK
Off, the
other items will be grayed out.
4
Press.6. or
~
to highlight the
REGZA·L1NK Setup
item you want to use, and press ..... or
~
to select
On
or desired mode.
• TV Auto Input Switch: On/Off
• TV Auto Power: On/Off
• Device Auto Standby: On/Off
• Speaker Preference: TV Speakers/Audio Receiver
5
To save the new settings, highlight
Done
and press
@.
To revert to the factory defaults, highlight
Reset
and press
8.
Displaying TV status information
To display TV status information using
RECALL:
Press
I
RECALL
I
on the remote control.
The TV will automatically turn itself off after
approximately 15 minutes if it is tuned to a vacant
channel or a station that completes its broadcast for the
day. This feature functions in
ANT/CABLE
mode only.
Understanding the last mode
memory feature
If the power is cut off while you are viewing the
TV, the Last Mode Memory feature automatically
turns on the TV when the power is resupplied.
Note: If it's possible, and you will be away
from the TV for an extended period of time you
should unplug the power cord.
To close the RECALL screen:
Press
I
RECALL
I
again.
To display TV status information using INFO:
INFO
Press 0 on the remote control.
The following additional information will display for
off air digital channels (if applicable):
• Title
• Duration
• Detailed description
I
50