Home >
Machine Settings
How Long the LCD Backlight Stays On
Change How Long the LCD Backlight Stays On
You can set how long the LCD backlight stays on after the last finger press.
1. Press Settings.
2. Press a or b to select the following:
a. Select [General Setup]. Press OK.
b. Select [LCD Settings]. Press OK.
c. Select [Dim Timer]. Press OK.
d. Select [Off], [10Secs], [20Secs], or [30Secs]. Press OK.
3. Press Stop/Exit.
Related Information
•
General Settings
>
Change Machine Settings from the Control Panel
>
General Settings
> Change
457