Using The Freeze Feature; Adjusting The Picture; Selecting The Picture Mode - Toshiba 40G300U1 Owner's Manual

To turn on the auto aspect ratio feature:
1無
Press and open the Picture menu.
2無
Highlight Theater Settings and press
3無
In the Auto Aspect Ratio field, select On.
4無
To save the new settings, highlight Done and press
. To revert to the factory defaults, highlight
Reset and press
To turn off the auto aspect ratio feature:
Select Off in step 3 above.

Using the FREEZE feature

To use the FREEZE feature:
1無
When viewing the TV, press
picture a still picture.
2無
To return to the moving picture, press
again (or any other button).
Note: If the TV is left in FREEZE mode for
more than 15 minutes, the FREEZE mode
will automatically be released and the TV will
return to moving picture.
Using the FREEZE function for any purpose
other than your private viewing may be
prohibited under the Copyright Laws of the
United States and other countries, and may
subject you to civil and criminal liability.

Adjusting the picture

Selecting the picture mode

You can select your desired picture settings from four
different modes, as described below.
Mode Picture Quality
Bright and dynamic picture (factory
Sports
setting)
Standard picture settings (factory
Standard
setting)
Lower contrast for darkened room
Movie
(factory setting)
Designed for viewing of PC tables
PC
and documents
Preference Your personal preferences
Note: PC mode is available for HDMI and PC
inputs only (grayed out for other input sources).
42
40_46G300U1_EN-A5.indb 42
Chapter 6: Using the TV's features
.
.
to make the
To select the picture mode using the menu
system:
1無
Press and open the Picture menu.
2無
Highlight Mode and press
3無
p q
Press or to select the picture mode you
prefer and press .
Note: The picture mode you select affects
the current input only. You can select a
different picture mode for each input.
.
(continued)
2010/3/2 上午 11:33:12