Selecting The Cinema Mode; Using The Freeze Feature; Adjusting The Picture; Selecting The Picture Mode - Toshiba 32E20U Owner's Record

To turn on the auto aspect ratio feature:
1
and open the Picture menu.
Press
2
Highlight Theater Settings and press
3
In the Auto Aspect Ratio field, select On.
4
To save the new settings, highlight Done and press
. To revert to the factory defaults, highlight
Reset and press
.
To turn off the auto aspect ratio feature:
Select Off in step 3 above.

Selecting the cinema mode

When you view a DVD (3:2 pulldown processed)
from a DVD player connected to the VIDEO 1, VIDEO 2,
ColorStream HD (component video), or HDMI inputs
on the TV, smoother motion can be obtained by setting
the Cinema Mode to Film.
To set the Cinema Mode to Film:
(available for 480i and 1080i signals)
1
and open the Picture menu.
Press
2
Highlight Theater Settings and press
3
In the Cinema Mode field, select Film.
4
To save the new settings, highlight Done and press
. To revert to the factory defaults, highlight
Reset and press
.
To set the Cinema Mode to Video:
Select Video in step 3 above.

Using the FREEZE feature

To use the FREEZE feature:
1
When viewing the TV, press
picture a still picture.
2
To return to the moving picture, press
again (or any other button).
Note: If the TV is left in FREEZE mode for
more than 15 minutes, the FREEZE mode
will automatically be released and the TV will
return to moving picture.
Using the FREEZE function for any purpose
other than your private viewing may be
prohibited under the Copyright Laws of the
United States and other countries, and may
subject you to civil and criminal liability.
36
Chapter 6: Using the TV's features

Adjusting the picture

Selecting the picture mode

.
You can select your desired picture settings from four
different modes, as described below.
Mode
Sports
Standard
Movie
PC
Preference
Note: PC mode is available for HDMI and PC
inputs only (grayed out for other input sources).
To select the picture mode using the menu
.
system:
1
2
3
to make the
Picture Quality
Bright and dynamic picture (factory
setting)
Standard picture settings (factory
setting)
Lower contrast for darkened room
(factory setting)
Designed for viewing of PC tables
and documents
Your personal preferences
and open the Picture menu.
Press
Highlight Mode and press
S T
Press or to select the picture mode you
prefer and press .
Note: The picture mode you select affects
the current input only. You can select a
different picture mode for each input.
.
(continued)