Connection Cable - Zanussi ZGG65334XA User Manual

CONNECTION CABLE

To replace the connection cable use only the
special cable or its equivalent. The cable type is:
H03V2V2-F T90.
Make sure that the cable section is applicable to
the voltage and the working temperature. The
yellow / green earth wire must be approximately 2
cm longer than the brown (or black) phase wire.
N
1. Connect the green and yellow (earth) wire to
the terminal which is marked with the letter 'E',
or the earth symbol
yellow.
2. Connect the blue (neutral) wire to the terminal
which is marked with the letter 'N' or coloured
blue.
3. Connect the brown (live) wire to the terminal
which is marked with the letter 'L'. It must
always be connected to the network phase.
ASSEMBLY
1.
8
L
, or coloured green and
2.
3.
min.
100 mm
min.
55 mm
30 mm
+ 2
480 mm
0
4.
5.
6.
min.
650 mm
2
+
560 mm
0