Kyocera Ecosys P3260dn Operation Manual page 240

Troubleshooting > Troubleshooting
S
Message
SD card error.
Press [OK].
SSD error.
Press [OK].
T
Message
The device cannot be
connected because
allowed connections
would be exceeded.
The file name already
exists.
You cannot copy.
The user name is not
registered.
The waste toner box is
full.
The waste toner box is
improperly installed.
This account ID is
already registered.
This login user name
already registered.
Checkpoints
―
―
Checkpoints
Are three handheld devices
connected simultaneously?
―
―
Is the waste toner box full?
―
―
―
10-22
Corrective Actions
An error has occurred on the SD
card. Job is canceled. Select [OK].
The error cord is as follows.
04: Insufficient space on the SD
card to complete this operation.
Move data or delete unneeded data.
An error has occurred on SSD. Job
is canceled. Select [End].
The error cords are as follows.
01: The amount of data that can be
saved at once has been exceeded.
Turn the power OFF/ON. If the error
still occurs, divide the file into
smaller files. If the error occurs after
the file is divided, the specified file
may be damaged. Delete the file.
04: Insufficient space on SSD to
complete this operation. Move data
or delete unneeded data.
Corrective Actions
Cancel a connection to a portable
device that is not being used, or set
the machine's auto disconnect time
to break portable device
connections.
Copying is not possible because
data with the same file name exists
at the destination. Delete the data
with the same file name at the
destination before copying.
The login user name entered is not
registered. Check the login user
name.
Replace the waste toner box.
The waste toner box is not installed
correctly. Set it correctly.
The account ID set has already
been registered. Register a different
account ID.
The changed login user name has
already been registered. Set a
different login user name.
Reference
Page
―
―
Reference
Page
page 7-5
page 5-10
page 9-3
page 10-9
page 10-9
page 9-17
page 9-3