Kyocera Ecosys P3260dn Operation Manual page 186

Setup and Registration (System Menu) > System Menu
Item
Power Off Timer (models for
Europe)
WeeklyTimer Set.
Weekly Timer
Schedule
Retry Settings
Limited Retries
Retry Times
Retry Interval
Auto Err. Clear
Err. Clear Timer
FormFeed TimeOut
Ping Timeout
*1 Displayed only when the optional Card Authentication Kit is activated.
*2 Displayed when the optional Network Interface Kit or Wireless Network Interface Kit is installed.
Disp. Status/Log
[Menu] key > [▲] [▼] key > [Device Common] > [OK] key > [▲] [▼] key > [Disp. Status/Log] > [OK] key
Item
Disp. Status/Log
JobsDetailStatus
Jobs Log
Select whether to turn off the power automatically after a period of inactivity.
Value: 1 hour, 2 hours, 3 hours, 4 hours, 5 hours, 6 hours, 9 hours, 12 hours, 1 day,
2 days, 3 days, 4 days, 5 days, 6 days, 1 week
Configure settings for switching the machine to OFF and waking it automatically at a specified
time for each day of the week.
Select whether to use Weekly Timer.
Value: Off, On
Specify the time for each day of the week at which the machine turns OFF.
-
Set whether or not retry of machine power-off is performed.
Value: Off, On
Set the number of retries for turning OFF this machine.
Value: 0 to 10 times
NOTE
This function is displayed when [Limited Retries] is set to [On].
Set the retry interval.
Value: 10 to 60 seconds (increments of 10 seconds)
If an error occurs during processing, processing stops to wait for the next step to be taken by
the user. In the Auto Error Clear mode, automatically clear the error after a set amount of time
elapses.
Value: Off, On
If you select [On] for Auto Error Clear, set the amount of time to wait before automatically
clearing errors.
Value: 5 to 495 seconds (in 5 second increments)
NOTE
This function is displayed when [Auto Err. Clear] is set to [On].
Receiving print data from the computer, the machine may sometimes wait if there is no
information signaling that the last page does not have any more data to be printed. When the
preset timeout passes, the machine automatically prints paper. The options are between 5 and
495 seconds.
Value: 5 to 495 seconds (in 5 second increments)
Set the time until timeout occurs when [Ping] is executed in "Network".
Value: 1 to 30 seconds (in 1 second increments)
Set the display method of the Status/Log.
Value: Show All, My Jobs Only, Hide All
Value: Show All, My Jobs Only, Hide All
8-34
Description
Description