Kyocera Ecosys P3260dn Operation Manual page 168

Setup and Registration (System Menu) > System Menu
Item
TCP/IP Settings
TCP/IP
IPv4 Setting
DHCP
Auto-IP
IP Address
Subnet Mask
Default Gateway
DNS Server
IMPORTANT
After changing the setting, restart the network or turn the machine OFF and then ON.
-
Select whether to use TCP/IP Protocol.
Value: Off, On
Set up TCP/IP (IPv4) to connect to the network. This setting is available when [TCP/IP] is set to [On].
Select whether to use the DHCP (IPv4) server.
Value: Off, On
Select whether to use Auto-IP.
Value: Off, On
Set the IP address.
Value: ###.###.###.###
NOTE
When DHCP is set to [On], this item is displayed only and cannot be entered.
Set the IP subnet mask.
Value: ###.###.###.###
NOTE
When DHCP is set to [On], this item is displayed only and cannot be entered.
Set the IP gateway address.
Value: ###.###.###.###
NOTE
When DHCP is set to [On], this item is displayed only and cannot be entered.
Set DNS server (IPv4).
Value: Auto (DHCP), Manual
NOTE
When [Manual] is selected, you can enter static DNS server information in the Primary and
Secondary fields provided.
8-16
Description