Table of Contents
Advertisement
24
HOW TO USE
Control Panel
* Depending on the model, some of the following functions may not be available.
Control Panel Features
LED Display
Indicator
Ice Type
Press the Ice Type button to choose either cubed
or crushed ice. The cubed or crushed ice icon will
illuminate.
Fridge Temperature
Indicates the target temperature of the fridge
compartment in Celsius (°C).
Freezer Temperature
Indicates the target temperature of the freezer
compartment in Celsius (°C).
The displayed temperature is the target
temperature, and not the actual temperature
of the fridge. The actual fridge temperature
depends on the food inside the fridge.
Pure N Fresh
The Pure N Fresh helps remove odors from the
fridge. The Pure N Fresh has two settings, Auto
and Power(PWR). In Auto mode, the Pure N Fresh
will cycle on and off in increments of ten minutes
on and one hundred ten minutes off. If set to the
Power(PWR) mode, the Pure N Fresh will stay on
continuously for four hours, cycling on and off in
increments of ten minutes on and five minutes
off. After four hours, the Pure N Fresh will switch
back to Auto mode.
y
y
Change Filter
Control
Button
When the Change Filter icon turns on, the air filter
needs to be replaced. After replacing the air filter,
press and hold the Pure N Fresh button for three
seconds to turn the icon light off. Change the air
filter approximately every 6 months.
NOTE
Press the Pure N Fresh button once for
Power(PWR) mode.
Press the Pure N Fresh button again to
switch back to Auto mode.
[
]
( On some
models)
[
]
( On some
models)
Advertisement
Table of Contents
