12
INSTALLATION
Ambient Temperature
Install this appliance in an area where the
temperature is between 13°C and 43°C. If the
temperature around the appliance is too low or
high, cooling ability may be adversely affected.
Measuring the Clearances
Too small of a distance from adjacent items
may result in lowered freezing capability and
increased electricity consumption charges.
Allow at least 60cm in front of the fridge to
open the doors, and no less than 5cm between
the back of the fridge and the wall.
60cm
Removing/Refitting the
Fridge Door Handles
Removing the Handles
1
2
5cm
Refitting the Handles
1
2
NOTE
When it is necessary to move the fridge
through a narrow opening, removing the
doors is the recommended procedure.
If it is necessary to remove the handles,
follow the directions below.
Loosen the set screws
Allen wrench and remove the handle.
Loosen the mounting fasteners
connect to the fridge door and handle
1
using a
/
in. Allen wrench, and remove
4
the mounting fasteners.
Assemble the mounting fasteners
both ends of the handle using a
Allen wrench.
Place the handle on the door by fitting
the handle footprints over the mounting
fasteners and tightening the set screws
3
with a
/
in. Allen wrench.
32
3
with a
/
in.
32
that
at
1
/
in.
4