Contents Of The Package; Installation - Veria 8277B User Manual

4.Contents of the package

After receiving the device, first check that the visible damage to the packaging. However, if the device is
unpacked and deleted
protective packaging is visibly damaged, in no case the device or its do not use the components and
contact your dealer immediately.
Package contents:
- Monitor
- Wall mount
- Terminals
- Screw M3x20mm 2pcs
- Dowle 2pcs
- Power adapter

5. Installation

Note: For trouble-free videophone operation, please observe the following installation instructions.
Do not install the monitor:
• in a dusty environment to prevent dust from intrusion including other solid the ingredients and
substances to be used
• near heat sources or in a place exposed to the sun is over
• in the open air with high humidity and condensation of steam
• in the vicinity of strong sources of electromagnetic
• on unstable and uneven surfaces
To install:
Prepare a suitable cable according to the manufacture instructions for connecting individual
depending on their distance between the mand the end of the corresponding connectors. Select the height
of the monitor after the installed installation and fix the metal bracket with the Horizontally. Make sure
the console is properly positioned shown in the following figure. Connect the connectors to the
monitor and put it on the console by moving it downwards .
For installation, use suitable cables with two copper conductors, cross-section min. 0.5 mm². The cable
does not have to be shielded, use a protective tube during installation