Table of Contents
Advertisement
No
Settings
items
1
Set up sound
Set the date and time
display in standby
2
mode
3
Call actions
4
Brightness
5
Alarm clock
6
Screen saver
7
DVR settings
8
Password protection
9
System time
Item
Still
Ringtone Sound
Ring time
Ring volume
View information
about standby date
and time
No action
Take a photo
Take a video
Take a photo and
video
Low/Normal/High
Set an alarm
Screen saver time
1/2/3 time window
Protection mode
Format:
Day/Month/Year/
Hours/Minutes/
Seconds
Explanation
Off by default. If enabled, the monitor will not
ring when it rings.
Repeat ringtone: If you turn off the monitor
when
ringing only once.
Door opening ringtone: Set the ringtone for
calls from vst. station.
Intercom ringtone: Set the ringtone for
an internal call.
Set the ring time (10-60 seconds).
Ringtone volume.
Monitor ringtone volume
It is turned off by default. You must enable this
feature if you want to use it.
When calling from vst. there will be no
automatic action on the station.
When calling from the entry station, photos are
taken automatically.
When you call from the input station, a video
recording is automatically made.
When calling from the entry station, both
photos and video recordings are automatically
taken.
Adjust the brightness of the screen
Alarm volume: Set 10- 100%
Alarm 1,2,3,4,5,6: You can set each alarm
separately.
Alarm status: Turn the alarm function on/off.
Alarm type: weekly/month/year/once. Date and
time: Set the alarm time. Format:
Day/Month/Year/Hours/Minutes.
Alarm ringtone: 8 tons to choose from.
Repeat weekly (An alarm must be set every
week).
Set which days to start the alarm.
Set: Never/1/2/5/10/30 minutes.
DVR function: On/off (alarm status)
Start time
End time
Recording Source: Select Recording Source
Unprotected: No password required to enter
settings. Partial protection: A password is
required to enter system settings.
Full protection: You need to enter a password
to enter both settings and system settings.
Advertisement
Table of Contents
