Veria 8277B User Manual page 21

12
Reset
13 Network status
information.
14 Information about this
device
Note: In a standby or DVR calendar the device will be in screen saver state if no operation is performed
within 4 hours.
SAFE HOME europe s.r.o. as a supplier, guarys to the original buyer that
this product will be free from any defects in material during normal use and operation
The supplier's obligation under this guarantee is limited to the replacement of the product.
Repair of the product or its replacement with a repaired product is at the supplier's decision.
Full terms and conditions of warranty and information regarding the warranty and
post-warranty service can be found on the website www.safe-home.eu.
SAFE HOME europe s.r.o. declares that the product complies with the basic
The facility can be freely operated in the EU. Compliance information can be found on the
Reset unread tags in
internal memory.
Reset unread tags in
external memory.
Reset all unread tags.
Reset call parameter.
Technical information
about the status of the
network.
Version of the
program.
Update the program.
implementation for a period of 24 months from the date of sale.
requirements and otherdecent provisionsof the Directive.
the www.safe-home.eu.
Gate lock status: set the unlock time of the lock
and the signal type for unlocking.
Outgoing button type: Select the destination of
the outgoing button, door, or gateway.
You can enable/disable the status of the
assigned unlocking device (if there is a station
with RFID functionality on the system).
Assigned unlocking device
Tamper status: If tamper sabotage contact is
active, it triggers an alarm when tampering is in
Only to check the health of the network on the
Warranty
place. Unit.
system.