Table of Contents
Advertisement
4-9 Auto power off
The meter is default to auto power off.
If the user intend to disable the " Auto Power off "
function, refer the section 4-10/point 3, page 18.
Note :
During execute the record function, the auto power
function will disable too.
4-10 Advanced setting procedure
1)Power off the meter, first use the finger to press the
the " Hold button " ( 3-3, Fig. 1 ) continuously, then
press the " Power button " ( 3-2, Fig. 1 ) once.
Release the finger from " Hold button ".
2) One by one to press the " Hold button " ( 3-3, Fig. 1 )
once a while to select the five four function and display
will show flashing text with as :
OFF.......Auto power On/Off management
SEC...... Change the data logger sampling time
Cnt....... To show the balance data numbers in the memory
CLr........Clear the existing saving data from the memory
ESC.......Escape the advanced setting function
Auto power On/Off
3)
a. Use the " Hold button " to select the main function to
" OFF ".
18
Advertisement
Table of Contents
