Installing The Chassis Into A Rack - Supermicro SuperServer SYS-510P-WT User Manual

2.5 Installing the Chassis into a Rack

Once rails are attached to the chassis and the rack, you can install the server.
1. Line up the rear of the chassis rails with the front of the rack rails.
2. Slide the chassis rails into the rack rails, keeping the pressure even on both sides (you
may have to press the locking tabs when inserting). See Figure 2-3.
3. When the server has been pushed completely into the rack, you should hear the locking
tabs "click".
Note: Figure is for illustrative purposes only. Always install servers to the bottom of a rack first.
Slide rail mounted equipment is not to be used as a shelf or a work space.
Figure 2-3. Installing the Server into a Rack
25
Chapter 2: Server Installation