Quick Reference Table - Supermicro SuperServer SYS-510P-WT User Manual

Quick Reference Table

Jumper Description
JBT1 CMOS Clear
JPME1 ME Manufacturing Mode
JWD1 Watchdog Timer
LED Description
LEDBMC BMC Heartbeat LED
UID-LED Unit Identifier (UID) LED
Connector
COM1, COM2
FAN1 - FAN7
IPMI_LAN
I-SATA0 - I-SATA7
S-SGPIO1
JD1
JF1
JI2C_EXP1
JIPMB1
JL1
JNCSI1
NVME0/1, NVME2/3
JNVI C
2
JPI C1
2
JPWR1
JPWR2
JPWR3
JRK1
JSD1, JSD2
JSTBY1
JVRM1, JVRM2
TPM1
LAN1, LAN2
M.2-H
SXB1A, SXB1B, SXB1C
SXB2
S-SATA0, S-SATA1
UID-SW
Description
COM Port, COM Header
CPU/System Fan Headers
Dedicated IPMI LAN Port
Intel® PCH SATA 3.0 Ports (with RAID 0, 1, 5, 10)
Serial Link General Purpose I/O Connection Header
Speaker Header (Pins 1-2: Speaker)
Front Control Panel Header
System Management Bus (SMBus) I
4-pin IPMI External I C Header (for an IPMI card)
2
Chassis Intrusion Header
NC-SI Header for IPMI Support
PCIe 4.0 x8 Slimline SAS Connector
NVMe I C Header
2
Power System Management Bus (SMB) I
8-pin Power Connector
4-pin Power Connector
24-pin ATX Power Connector
Intel RAID Key Header
SATA DOM Power Connectors
Standby Power Header
SMBus Clock/DATA header connected to CPU/Mem VRMs
Trusted Platform Module/Port 80 Connector
LAN (RJ45) Ports
M.2 PCIe 3.0 x4 Slot (Supports M-Key 2280 and 22110)
Supermicro Proprietary WIO Left Add-on Card Slots
Supermicro Proprietary WIO Right Add-on Card Slot
SATA 3.0 Ports with SATA DOM Power
Unit Identifier (UID) Switch
17
Chapter 1: Introduction
Default Setting
Open (Normal)
Pins 1-2 (Normal)
Pins 1-2 (Reset)
Status
Blinking Green: BMC Normal
Solid Blue: Unit Identified
C
2
C Header
2