System Features; Front View; Drive Carrier Indicators - Supermicro SuperServer SYS-510P-WT User Manual

1.2 System Features

The following views of the system display the main features. Refer to Appendix B for additional
specifications.

Front View

Service Tag
0
0
Rack Ear Bracket
Item Description
0 - 3 3.5" hot-swap SAS3/SATA3/NVMe* drive bays
4 Slim DVD ROM drive (optional)
Slim floppy drive bay/USB/COM port tray (optional)
5
* SAS3 and NVMe support available with additional parts; see optional parts list

Drive Carrier Indicators

Each drive carrier has two LED indicators: an activity indicator and a status indicator. For RAID
configurations using a controller, the meaning of the status indicator is described in the table
below. For OS RAID or non-RAID configurations, some LED indications are not supported,
such as hot spare. For VROC configurations, refer to the VROC appendix in this manual.
Color
Activity LED
Blue
Blue
Off
Status LED
Red
Red
Red
Red
Red
4
1
1
Figure 1-1. Front View
Logical Storage Drive Numbers
Drive Carrier LED Indicators
Blinking Pattern Behavior for Device
Solid On Idle SAS/NVMe drive installed
Blinking I/O activity
Idle SATA drive
Solid On Failure of drive with RSTe support
Blinking at 1Hz Rebuild drive with RSTe support
Blinking with two blinks Hot spare for drive with RSTe support
and one stop at 1Hz
On for five seconds, Power on for drive with RSTe support
then off
Blinking at 4Hz Identify drive with RSTe support
10
Chapter 1: Introduction
Control Panel
5
2 3
Rack Ear Bracket