Table of Contents
Advertisement
2.5 Installing the Server into a Rack
Once rails are attached to the chassis and the rack, you can install the server.
1. Extend the outer rails as illustrated below.
2. Align the inner rails of the chassis with the outer rails on the rack.
3. Slide the inner rails into the outer rails, keeping the pressure even on both sides. When
F.
the server has been pushed completely into the rack, it should click into the locked
position.
SCREW
1
2
screw the handles the
outer rails for secure
purpose if necessary
Note: Figure is for illustrative purposes only. Always install servers to the bottom of a rack first.
Slide rail mounted equipment is not to be used as a shelf or a work space.
Figure 2-5. Installing the Server into a Rack
SCREW
26
Chapter 2: Server Installation
COMPLETE
ABLECOM
DATE:2008/08/14
REV:2
Advertisement
Table of Contents
Troubleshooting
