Setting Up The Monitor; Attaching The Stand - Dell SP2318H User Manual

Setting Up the Monitor

Attaching the Stand

NOTE: The stand is detached when the monitor is shipped from the
factory.
NOTE: This is applicable for a monitor with a stand. If you have
purchased a third-party stand, refer to the respective stand setup
guide for the set-up instructions.
To attach the monitor stand:
1. Follow the instructions on the flaps of carton to remove the stand from the
top cushion that secures it.
2. Insert the stand base blocks fully into the stand slot.
3. Lift the screw handle and turn the screw clockwise.
4. After fully tightening the screw, fold the screw handle flat within the recess.
Setting Up the Monitor
│
27