Table of Contents
Advertisement
Energy Star
P
on
E
TEC
The OSD functions only in the normal operation mode. When any button is pressed
in the Active-off mode, the following message will be displayed:
Activate the computer and the monitor to gain access to the OSD.
NOTE: The message may be slightly different according to the
connected input signal.
NOTE: This monitor is ENERGY STAR
NOTE:
P
: Power consumption of on mode as defined in Energy Star 7.0
on
version.
E
: Total energy consumption in kWh as defined in Energy Star 7.0
TEC
version.
* Zero power consumption in OFF mode can only be achieved by disconnecting the
main cable from the monitor.
** Maximum power consumption with max luminance, and USB active.
This document is informational only and reflects laboratory performance. Your
product may perform differently, depending on the software, components and
peripherals you ordered and shall have no obligation to update such information.
Accordingly, the customer should not rely upon this information in making decisions
about electrical tolerances or otherwise. No warranty as to accuracy or
completeness is expressed or implied.
Power Consumption
18.5 W
54.1 kWh
®
-compliant.
About Your Monitor
│
19
Advertisement
Table of Contents
