Wireless - D-Link DIR-1950 User Manual

Section 3 - Configuration
In the Settings menu on the bar at the top of the page, click Wireless to see your wireless network settings for your
DIR-1950.
Click Save at any time to save the changes you have made on this page.
Status Enable or disable the Smart Connect Feature. When enabled,
only a few configuration options are available to simplify
configuration.
If Smart Connect is Status is Enabled:
Wi-Fi Name (SSID)
Create a name for your wireless network using up to 32
characters.
Password
Create a password to use for wireless security. Wireless clients
will need to enter this password to successfully connect to
the network.
Wireless - Advanced Settings...
Security Mode Choose None or WPA/WPA2-Personal (recommended).
Transmission Power Select the desired wireless transmission power.
Schedule
Use the drop-down menu to select the time schedule that the
rule will be enabled for. The schedule may be set to Always
Enable, or you can create your own schedules in the Schedules
section. Refer to Time & Schedule - Schedule on page 80
for more information.
D-Link DIR-1950 User Manual

Wireless

Smart Connect
Wireless
55