Philips AC1213 User Manual page 16

Problem
The air purifier
produces a
unpleasant smell.
The air purifier is
loud.
The air purifier still
indicates that I
need to replace a
filter, but I already
did.
Error codes "E1",
"E2", "E3" or "E4"
displays on the
screen.
EN
14
Possible solution
•
The first few times you use the air purifier, it may produce
a plastic smell. This is normal. The air purifier may also
produce an unpleasant smell when the filter is dirty. In this
case, clean or replace the appropriate filter.
• If the air purifier produces a burnt odor, switch OFF and
unplug from the electrical outlet. Contact the Consumer
Care Center in your country.
•
If the air purifier is too loud, change the fan speed to a
lower fan speed level. When using the air purifier in a
bedroom at night, choose the night sensing mode or select
a lower fan speed level.
•
Perhaps you did not reset the filter lifetime counter. Plug
in the air purifier, touch
touch and hold the
•
The air purifier has malfunctions. Visit www.philips.com/
support or contact the Consumer Care Center in your
country.
to switch on the air purifier, and
for 3 seconds.