Cabinet and Controller Operation Instruction
Storing food stuffs:
To get the best results from your appliance, please follow these instructions:
1: Only store foodstuffs in the appliance when it has reached the correct operating temperature.
2: Always close the door. when hot in use and appliance is switched on. The appliance has fan operating door switches
and WILL NOT cool when the door is open.
3: Do not place uncovered nonfood or liquid inside the appliance.
4: Wrap or cover food where possible.
5: Do not obstruct the fans inside the appliacnce.(Refrigerator)
6: Avoid opening the door for prolonged periods of time.
7. The maximum load for a shelf is 30Kg.
8: The food must be put into containers before being placed into cabinet or on the shelf. Food must not be placed
into food cabinet directly.
Turn on:
9: Close the door of the appliance.
10.Ensure the power switch is set to [O] and insert plug into socket.
11. Switch on the Power{I}. The current temperature within the appliance is displayed.
12: The on the display will flash for 3-min to indicate a delay between the motor compressor being stopped and then
restarted.
Temperature setting and control (Mechanical version)
•
hen you open the door, inside the cabinet, in the front top direction you can find the
thermostat control knob (as shown in Figure 1).
• o reduce the temperature ithin the cabinet, rotate the thermostat nob cloc
rotating the thermostat anti-clockwise, will increase the temperature within the cabinet and
finally turn it off.
• he temperature displayed on the dial is the appro imate cabinet temperature. ( s sho n
in Figure 2 ).
WARNING: Do not turn the thermostat to its maximum (coldest) setting, as this may
cause the appliance to run continuously and 'ice-up'. This will lead to a fault which
is excluded from the warranty
ise, hile
7
ORIGINAL INSTRUCTION
GB