AXIS P9106-V Network Camera
Additional settings
1. Go to Settings > Image > Wide dynamic range.
2. If required, turn on WDR.
Note
WDR may cause artifacts in the image.
Find out more about WDR and how to use it at axis.com/web-articles/wdr.
Maximize details in an image
Important
If you maximize details in an image, the bitrate will probably increase and you might get a reduced frame rate.
•
Make sure to select the capture mode that has the highest resolution.
•
Set the compression as low as possible.
•
Select MJPEG streaming.
•
Turn off Zipstream functionality.
Overlays
Overlays are superimposed over the video stream. They are used to provide extra information during recordings, such as a timestamp,
or during product installation and configuration. You can add either text or an image.
Show a text overlay in the video stream when the device detects motion
This example explains how to display the text "Motion detected" when the device detects motion:
Image without WDR.
Image with WDR.
8