Table of Contents
Advertisement
Quick Links
Connect Family
The RE667 Slimline Touchpad
for controlling the security system. It is AC powered and
communicates with the panel wirelessly.
Features
• Vibrant 7'' Android™ tablet display
• Provides local control of security and automation functionality
• Wall or table mounted
• Encrypted, Connect+ and BAT-Connect enabled, battery-backed
Wi-Fi™ connection
Installation Overview for Connect+
1. Confirm the panel has a Wi-Fi DeviceLink card installed.
Installing the Wi-Fi DeviceLink Card
• Disconnect the panel's AC power and backup
battery.
• Install the Wi-Fi DeviceLink card in Slot 2 by
carefully aligning the nylon retention posts and
the 8-pin connector while pushing the card
firmly until all posts are fully seated.
• Reconnect the panel's AC power and backup
battery.
• Verify the Wi-Fi card LEDs are on.
2. Choose a mounting location. Touchpad can be mounted on a wall or tabletop.
3. Identify your network and verify signal strength before mounting it permanently.
1. Ensure the panel is powered.
2. Power the Touchpad by applying AC power.
3. Select the "Connect" option to see the available networks. If the "Connect" option is
not available, press "Setup" then "Factory Default". The Touchpad can be connected
to either the Wi-Fi DeviceLink card or the home router for internet access. (Internet
access allows camera control and the ability to modify users.)
4. Once a network is determined, verify the signal strength. If the signal strength
displayed is less than 35, relocate the Touchpad or Connect+ panel. If neither options
are available, install an RE621 Touchpad Range Extender.
Note: If connecting to a home network router, the Connect+ needs to be connected
to the same network via ethernet. The Touchpad cannot connect to the panel over an
unsecured or open network.
RE667 Slimline Touchpad
is an intuitive interface
AC Power
Input
I
Slot 2
Backup
Battery
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Alula RE667W
Summary of Contents for Alula RE667W
- Page 1 RE667 Slimline Touchpad Connect Family The RE667 Slimline Touchpad is an intuitive interface for controlling the security system. It is AC powered and communicates with the panel wirelessly. Features • Vibrant 7’’ Android™ tablet display • Provides local control of security and automation functionality •...
- Page 2 • Tap the "Restart" button to try again. 6. If using cameras or user management features, you must log in to the Alula Cloud as the account owner. To log in go to Settings and select Touchpad. Enter master code, then select Alula Cloud.
- Page 3 Installation Overview for BAT-Connect 1. Chose a mounting location. Touchpad can be mounted on a wall or tabletop. 2. Identify your network and verify signal strength before mounting it permanently. 1. Ensure the system is powered. 2. Power the Touchpad by applying AC power. Note: The Touchpad cannot run off panel bus.
- Page 4 BAT-Connect must be connected via ethernet or Wi-Fi. In addition you must log in to the Alula platform using the account owner user name and password. To log in go to Settings and select Touchpad. Enter master code, then select Alula Cloud.
-
Page 5: Wall Mounting
Wall Mounting 1. There are two mounting configurations. A. If mounting on a stud, use the two centered holes labeled below [A]. B. If not mounting on a stud, use the four corner mounting holes. Insert the wall anchors prior to screwing the screws in place [B]. -
Page 6: Menu Guide
3. Slide the Touchpad 5. Lock in cover by pressing 4. Drop cover behind onto the mounting plate. at these locations until Touchpad. snapped into place Push any extra wire into wall before sliding onto mounting plate. 6. Plug in power supply. Menu Guide Security •... - Page 7 Scenes • Create scenes from the Touchpad by clicking the “+ Add” button • Enable/disable scenes with the toggle button • Navigate to the edit scene page by selecting an item in the list • Rename a scene by selecting the name label in the top bar •...
- Page 8 • Wi-Fi - connect via Wi-Fi if using cameras and user management features °F or °C • Temperature Scale - option for displaying • Alula Cloud - must be logged into Alula Cloud as the account owner to use cameras and user management features • Power Off •...
-
Page 9: Home Screen Functions
Home Screen Functions* The headline indicates panel status such as "Disarmed" or "Armed Stay" Tap or slide to view Side Menu Tap to mute beeps during arm/disarm action Tap to view Panic options and then press desired Panic option for two seconds to trigger The time zone is Tap to turn the configured online... -
Page 10: Panic Functions
Panic Functions* Hold for two seconds to trigger Hold for two seconds auxiliary alarm to trigger fire alarm Hold for two seconds to trigger police alarm Turn on/off individual panics *These features were taken from a Connect+. Your features may differ depending on panel. - Page 11 Pro Tips Push any extra wire into wall before sliding Touchpad onto mounting plate to ensure the wires don’t get pinched. Drill a hole in the wall through any of the 4 mounting plate windows if no hole exists. The Touchpad display turns off on its own after specified allotted time of inactivity (Auto sleep display setting).
-
Page 12: Specifications
Changes or modifications not expressly approved by Alula could Le présent appareil est conforme aux cnr d’Industrie void the user’s authority to operate this equipment. Canada applicables aux appareils radio exempts de licence.
Need help?
Do you have a question about the RE667W and is the answer not in the manual?
Questions and answers