Table of Contents
Advertisement
Quick Links
Connect Family
The RE657WF Flat Mount Touchpad i
the security system. Designed to cover unsightly marks, the Flat Mount
Touchpad is well suited for takeover situations. It is AC powered and
communicates with the panel wirelessly.
Features
• Vibrant 7" Android™ tablet display
• Provides local control of security and automation
functionality
• Expanded footprint for covering marks left by
pre-existing keypads
• Encrypted, Connect+ and BAT-Connect enabled, battery-backed
Wi-Fi™ connection
Installation Overview for Connect+
1. Confirm the panel has a Wi-Fi DeviceLink card installed.
Installing the Wi-Fi DeviceLink Card
• Disconnect the panel's AC power and backup
battery.
• Install the Wi-Fi DeviceLink card in Slot 2 by
carefully aligning the nylon retention posts and
the 8-pin connector while pushing the card
firmly until all posts are fully seated.
• Reconnect the panel's AC power and backup
battery.
• Verify the Wi-Fi card LEDs are on.
2. Choose a mounting location.
3. Identify your network and verify signal strength before mounting it permanently.
1. Ensure the panel is powered.
2. Power the Touchpad by applying AC power.
3. Select the "Connect" option to see the available networks. If the "Connect" option is
not available, press "Setup" then "Factory Default". The Touchpad can be connected
to either the Wi-Fi DeviceLink card or the home router for internet access. (Internet
access allows camera control and the ability to modify users.)
4. Once a network is determined, verify the signal strength. If the signal strength
displayed is less than 35, relocate the Touchpad or Connect+ panel. If neither options
are available, install an RE621 Touchpad Range Extender.
Note: If connecting to a home network router, the Connect+ needs to be connected
to the same network via ethernet. The Touchpad cannot connect to the panel over an
unsecured or open network.
RE657WF Flat Mount Touchpad
s an intuitive interface for controlling
AC Power
Input
I
Slot 2
Backup
Battery
Advertisement
Table of Contents
Related Manuals for Alula RE657WF-R
Summary of Contents for Alula RE657WF-R
- Page 1 RE657WF Flat Mount Touchpad Connect Family The RE657WF Flat Mount Touchpad i s an intuitive interface for controlling the security system. Designed to cover unsightly marks, the Flat Mount Touchpad is well suited for takeover situations. It is AC powered and communicates with the panel wirelessly.
- Page 2 • Tap the "Restart" button to try again. 6. If using cameras or user management features, you must log in to the Alula Cloud as the account owner. To log in go to Settings and select Touchpad. Enter master code, then select Alula Cloud.
- Page 3 Installation Overview for BAT-Connect 1. Choose a mounting location. 2. Identify your network and verify signal strength before mounting it permanently. 1. Ensure the system is powered. 2. Power the Touchpad by applying AC power. Note: The Touchpad cannot run off panel bus. Existing wiring needs to be moved to the provided power adapter.
- Page 4 BAT-Connect must be connected via ethernet or Wi-Fi. In addition you must log in to the Alula platform using the account owner user name and password. To log in go to Settings and select Touchpad. Enter master code, then select Alula Cloud.
-
Page 5: Power Transformer
Power Converter Splice Power Transformer Display See table below for Max Wire Length 4. Pull wire from touchpad to AC outlet. If replacing an existing touchpad, existing wiring can be used; however, new touchpad must be powered by supplied 12V DC power transformer. Do not power from existing panel. -
Page 6: Menu Guide
Menu Guide Security • History - shows event history • Attention - shows all opened, bypassed, or troubled zones. Zones can be bypassed or activated by pressing the toggle to the right of the zone name. Cameras • Cameras - can be viewed directly from the Touchpad. Live view, clips, and event notifications are supported. - Page 7 • Wi-Fi - connect via Wi-Fi if using cameras and user management features °F or °C • Temperature Scale - option for displaying • Alula Cloud - must be logged into Alula Cloud as the account owner to use cameras and user management features • Power Off •...
- Page 8 • Users - manage device users directly from the touchpad (only the account owner can modify users, internet access is required). • Keypads - lists the panel’s keypads • Rename keypads by selecting an item on the list and holding it for 2 seconds •...
-
Page 9: Home Screen Functions
Home Screen Functions* The headline indicates panel status such as "Disarmed" or "Armed Stay" Tap or slide to view Side Menu Tap to mute beeps during arm/disarm action Tap to view Panic options and then press desired Panic option for two seconds to trigger The time zone is Tap to turn the configured online... -
Page 10: Panic Functions
Panic Functions* Hold for two seconds to trigger Hold for two seconds auxiliary alarm to trigger fire alarm Hold for two seconds to trigger police alarm Turn on/off individual panics *These features were taken from a Connect+. Your features may differ depending on panel. - Page 11 Pro Tips The Touchpad display turns off on its own after specified allotted time of inactivity (Auto sleep display setting). It will turn back on when the screen is touched, or for some alarm conditions. The screen can also be turned off manually by pressing "Sleep." The Touchpad volume can be changed in the Settings screen.
-
Page 12: Specifications
(2) This device must accept any interference, including including interference that may cause undesired operation. interference that may cause undesired operation of Changes or modifications not expressly approved by Alula could the device. void the user’s authority to operate this equipment.
Need help?
Do you have a question about the RE657WF-R and is the answer not in the manual?
Questions and answers