Default; Web Management; Login Interface - Epcom XMR401HDS User Manual

2.9.5. DEFAULT

In this page, you can click the default button to reset the parameters to factory settings.
Click reset to restore the original data.
Remark:
For, language, MAC address, register info, CMS server info, speed adaption parameter will not change
during default settings.

3. WEB MANAGEMENT

3.1. LOGIN INTERFACE

1) Connect MDVR into local area network, set relevant information to make sure the computer can
visit the MDVR.
2) Open browser and input http:// IP address of MDVR. It will go to the WEB login interface
of MDVR. And the default IP address is 192.168.1.100
3) Interface will pop up a window to install N9M activex, click install.
4) Refresh the web page, enter default user name admin/admin to log in.
62-73
User manual for XMR401HDS