Wired Remote Controller Installation/Service Mode - Samsung RHF100KHEA User & Installation Manual

Wired Remote Controller Installation/Service Mode

Additional Functions of Your Wired Remote Controller
Main Menu
1. If you want to use the various additional functions for your Wired Remote Controller, press the Set and
Esc buttons at the same time for more than three seconds.
You will enter the additional function settings, and the [main menu] will be displayed.

2. Refer to the list of additional functions for your Wired Remote Controller on the next page, and select the desired
menu.
Using the [∧]/[∨] buttons, select a main menu number and press the [＞] button to enter the sub-menu setting

screen.
Using the [∧]/[∨] buttons, select a sub-menu number and press the [＞] button to enter data setting screen.

When you enter the setting stage, the current setting will be displayed.

Refer to the chart for data settings.

Using the [∧]/[∨] buttons, select the settings. Press the [＞] button to move to the next setting.

Press the Set button to save the settings and exit to the sub-menu setting screen.

Press the Esc button to exit to normal mode.

• While setting the data, you can use the [＜]/[＞] buttons to set the range of Data bit.
• While configuring the setting, press the Esc button to exit to the setting sub-menu without saving your
changes.
48
RHF050KHEA_IB,IM_E_32885-3.indd 48
Data bit
Sub-menu 1 2 3 4 5 6
2011-10-12 오후 5:30:39