Table of Contents
Advertisement
Accessories
AA
The following accessories are supplied with the indoor unit.
The type and quantity may differ depending on the specifications.
User & Installation
Insulation cover
manual
pipe in
Flexible hose
Clamp hose
Selecting the installation location
There must be no obstacles near the air inlet and outlet.
Install the indoor unit on a ceiling that can support its weight.
Maintain sufficient clearance around the indoor unit.
Make sure that the water dripping from the drain hose runs away correctly and safely.
The indoor unit must be installed in this way, that they are out of public access. (Not touchable by the users)
After connecting a chamber, insulate the connection part between the indoor unit and the chamber with t10 or thicker
insulation. Otherwise, there can be air leak or dew from the connection part.
Rigid wall without vibration.
Where it is not exposed to direct sunshine.
Where the replacement parts. (air filter, heat exchange element, humidifier element) can be removed and cleaned easily.
Space Requirements
' A ' mm
Return Air
Supply Air
Exhaust Air
Outdoor Air
Model
RHF050KHEA
RHF100KHEA
RHF050KHEA_IB,IM_E_32885-3.indd 29
Insulation cover
Insulation drain
pipe out
'C' mm
Inspection hole('E'mm)
for DX-COIL, Humidifier element
Inspection hole('E'mm)
for filter, heat exchange element, fan,
motor and damper
'A'
'B'
1000
1553
1135
1763
Insulation cover
Insulation pipe
drain
'C'
'D'
600
200
800
300
Cable tie
'E'
450 x 450 or more
550 x 550 or more
29
2011-10-12 오후 5:30:30
Advertisement
Table of Contents
Troubleshooting
