Indoor Unit Setting - Samsung RHF100KHEA User & Installation Manual

Indoor unit setting

Power and communication cable connectiona
1. Before installing the indoor unit, assign an address to the indoor unit according to the air conditioning system plan.
2. The address of the indoor unit is assigned by adjusting MAIN(SW01, SW02) and RMC(SW03, SW04) rotary switches.
 The designs and shape are subject to
change according to the model.
Setting Main Address
The MAIN address is for communication between the indoor unit and the outdoor unit.

Therefore, you must set it to operate the product properly.
You can set the MAIN address from '00' to '99' by mixing SW01 and SW02.

The MAIN address from '00' to '99' should differ from each other.
Check the indoor unit address on the plan that you are to install and set the address according to

the plan
.
• You may not need to set main address if you selected Auto Address Setting from the outdoor unit: see details
on the outdoor unit installation manual.
For Example When MAIN address is set as "12".
Setting RMC Address
The SW03, SW04 RMC switch is the address setting switch for controlling the indoor unit with the

centralized controller.
You must set the SW03,SW04 and K2 switch when using the centralized controller.

You don't have to set the SW03 and SW04 RMC switch when not suing the centralized controller.

For Example When RMC address is set as "12".
SW03
42
RHF050KHEA_IB,IM_E_32885-3.indd 42
SW01 SW02
SW05 SW06
SW04
SW03 SW04
SW07 SW08 SW09
2011-10-12 오후 5:30:37