Samsung MIM-B18 User Manual page 121

Communication Mode Setting by Channel
1
Click [System Settings]
2
Click [Edit] from communication mode by channel setting.
 [Edit] will change to [Cancel].
 Selection buttons are enabled. However, the channels which have searched
device maintains its selection button disabled.
3
When each channel is enabled, check the communication mode you want to set by
channel.
 You cannot change the communication mode of channel which has currently
connected device.
 When setting communication mode of interface module, tracking, monitoring
and controlling for SIM/PIM will be set to be possible.
 When setting communication mode of centralized controller, tracking,
monitoring and controlling for centralized controller and SIM/PIM will be set to
be possible.
4
Click [Save] after setting is completed.
 "Reading data from DMS2. Please wait." message appears and saving is completed.
Then, tracking page with disabled items will be displayed again.
 If you click [Cancel], check boxes will be disabled and [Cancel] will change to
[Edit].
 [Tracking] when DMS2 web page menu screen appears.
121
E-