VIA Mainboard 845G Series Manual page 9

Connectors
!
Two IDE connectors
!
One floppy drive interface supports up to two 2.88 MB floppy drives
!
One 20-pin ATX power supply connector
!
One 4-pin (2x2) 12V ATX power supply connector
!
One 4-pin (1x4) ATX Auxiliary power supply connector
!
CPU fan, power supply fan and chassis fan connectors
!
One IR connector (optional)
!
One S/PDIF connector (optional)
!
One CD audio in connector
!
One AUX-IN connector
!
One front audio connector
!
One SCR (Smart Card Reader) connector (optional)
!
One WOL (Wake-On-LAN) connector
ATX Double Deck Ports (PC99 color-coded connectors)
!
Two USB ports
!
One RJ-45 LAN connector (only for 845G-MWT)
!
One external DB-9 serial port connector: COM1 (UART)
!
One VGA connector
!
One SPP/ECP/EPP DB-25 parallel port
!
One mini-DIN-6 PS/2 mouse port
!
One mini-DIN-6 PS/2 keyboard port
!
One GAME/MIDI port
!
Three audio jacks: SPK-OUT, LINE-IN and MIC-IN
PCI Bus Master IDE Controller
!
Two PCI IDE interfaces support up to four IDE devices.
!
Supports ATA/33, ATA/66 and ATA/100 hard drives.
!
PIO Mode 3 and Mode 4 Enhanced IDE (data transfer rate up to 16.6
MB/sec.).
!
Bus mastering reduces CPU utilization during disk transfer.
!
Supports ATAPI CD-ROM, LS-120 and ZIP.
Utility Panel: Front Audio
The Front Utility Panel is an interface that brings audio ports (MIC-IN, and
Hear Phone OUT) to the front of your system.
The 845G MAINBOARD Series
Introduction
Page 9